—
"—
"?fltW*/-T
1%\/'/***/'—
,"»"—
*
"
MIDI Controllers
MIDI (Musical Instrument Digital
Interface)
provides for the use of various
controls in
its
specifications The
soft
controller MIDI implementation of the
Xpander allows complete? com
patibility with any MIDI source.
Besides notes, velocity, and patch changes
a
wide variety of other control
information can
be
transmitted through MIDI There
are
three
types
of controls specified \n MIDI:
BENDER
is
MIDI
Pitch Wheel Change It is transmitted
EnH.vv.ww; Where E is status for
Pitch
Change, n is
Midi
Channel
number 1-16,
w is LSB
and ww is MSB
PRESSURE
is
MIDI
Channel Pressure
(after
Touch). It is
transmitted DnH.vy; where
D
is
status for Channel Pressure, n is MIDI Channel number
1-16.
and vv
is
pressure value.
CONTROL CHANGES are other controllers, that can
be
either
on
.'off or variable controls.
There are 122 of these, transmitted BnH.cc.vv; where
B
is status
for MIDI control change n is
MIDI Channel number 1-16,
cc
is control number
(0-121).
and w is value of change
The following list provides information
about
controls
used
in various
MID! instruments. This
list
has been compiled based upon information provided to us by
other manufacturers and is
subject to changes and improvements by them. If
your instrument
is not on
this list, contact
its manufacturer
about
information
about
its MIDI implementation
70 Xpande/ Owners Manual
Appendix
To Next Page
Loading...
Need help?
General
