Obvius AcquiSuite Ally 12 - Meter Configuration Overview; Meter Installation Overview

AcquiSuite Ally 12 & 48 User Guide (Rev D)
14 | P a g e
Meter Configuration Overview
▪ Work performed ahead of the installation saves time in the field and results in fewer
mistakes!
Tools
Typical Work
• Desktop or Laptop PC
• USB Type AB Cable (preferred) or
Ethernet & USB wall charger (> 500 mA)
• Thumb Drive (Obvius Ally Configuration
Console Installer) or
access to Obvius FTP site. (qualified Obvius
personnel only)
• Electrical Schematics of project
• Installation of Obvius Ally Configuration
Console Software
• Connect USB/Ethernet cable from PC to
meter
• Establish communication with meter
• Firmware update (if desired)
• Configure software for anticipated meter
setup
• Field wiring documentation
• Set Alarms
• Set Security PINs
Meter Installation Overview
▪ Performed by licensed electrician.
Tools
Typical Work
• Mounting hardware (customer supplied)
• Wiring & supplies, labels, wire ties
• Tablet, Smart Device, or
Laptop PC
• Multi Meter, Current Clamp
• Camera
• Mechanical mounting
• Electrical installation
• Install voltage cover
• Apply power to meter
• Confirm basic operation of meter