Need help?Do you have a question about the Oce 7055 and is the answer not in the manual?
Overview of the Océ 7055/7056 large format copier.
Details the operating panel, stand-by mode, buttons, and functions.
Explains how to interpret display information in various operational modes.
Instructions for powering the copier on, off, and its ready state.
Explains making copies on different materials via manual or automatic feed.
Step-by-step guide for creating copies using automatic and manual feed.
Adjusting exposure level and other specific copy parameters.
Instructions for adjusting trailing and leading edges of the copy.
Procedure to make a test strip for checking exposure and quality.
Detailed guide for loading new rolls of copy material into the machine.
How to set paper type and width for loaded copy material rolls.
Step-by-step instructions for refilling the toner.
Procedures for cleaning the transparent and pressure platens.
Overview of common issues and error indication methods.
Identifying, diagnosing, and resolving operator-fixable errors.
Steps for addressing machine errors and contacting support.
Procedure to remove jammed originals from the machine.
Instructions for clearing copy material jams from the feed path.
Default configuration settings for the Océ 7055/7056 copier.
Explains copy cutting lengths and available settings in this mode.
Comprehensive technical specifications of the copier.
Recommended temperature and humidity for machine operation.
Guidelines on original size, thickness, weight, and condition.
Information on recommended paper and film types for copying.
Essential safety rules for maintenance, connection, and operation.
Guidance for power connection based on wire colours.
Introduction to safety data sheets for product handling and environment.
Explains manual conventions, symbols, and attention getters.
A form for users to provide feedback and suggestions on the manual.
Contact details for Océ offices worldwide.
To Next Page
General