Oce 7055 - Safety Data Sheet Océ Developer

Safety information 65
Safety data sheet Océ Developer
continued on the next page
MATERIAL SAFETY DATA SHEET Number E-181-b-UK
(93/112/EEC and ISO 11014-1) Date July 1997
Page 1 of 2
Océ D1 Developer
1. Product and company identification
Product name Océ D1 Developer
Packing Polyethylene bottle, contents 1,65 kg/3.63 lb
C
ompany
O
c
é
(
UK
)
Ltd.
Address Langston Road, Loughton, Essex IG10 3SL
Telephone 0181-508 5544 (contact product safety coordinator)
Telefax 0181-508 6689
2. Composition / information on ingredients
3. Hazards identification
In a developer dust cloud the formation of an explosive dust-air mixture is possible.
Developer dust may cause discomfort for the eyes and respiratory tract, in the same manner as inert nuisance dust.
To our knowledge, with due observance of the recommended exposure limit and of normal hygiene this product presents no health hazard
in normal use.
4. First aid measures
Eyes contact Rinse with plenty of water.
Skin contact Wash with cold water and soap.
Inhalation Clean nose, mouth, throat. Cough up. Fresh air.
Ingestion Rinse mouth with water. If large quantity swallowed seek medical advice.
For any medical advice take along this material safety data sheet.
5. Fire fighting measures
Flash point (
o
C) N.A. (=Not Applicable)
Explosion limits (dust explosion) LEL U (= unknownUEL U)
Ignition temperature (
o
C) Approx. 500
Extinguishing media Dry chemical, carbon dioxide, water spray (fog), foam
Special fire fighting precautions N.A.
Hazardous products of decomposition N.A.
6. Accidental release measures
Spills can be cleaned with a vacuum cleaner or a damp rag. Do not use warm water, because this makes the powder soft and sticky.
7. Handling and storage
Keep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust.
No special technical measures for storage.
8. Exposure controls / personal protection
No special technical measures. No personal protective equipment needed.
Industrial hygiene: after skin contact wash with cold water and soap.
Threshold Limit Value for nuisance dust: 10 mg/m
3
.
Threshold Limit Value for carbon black: 3,5 mg/m
3
.
Ingredients CAS No. Classification Weight %
Iron oxide 1317-61-9 50-100
Polyester resin 170831-75-1 1-5
Phenoxy resin PMN P-95-461 1-5
Carbon black 1333-86-4 < 1
Dye < 1
Pigments < 1