Oce 7055 - Special Copy Settings

Copy jobs 19
Special settings
Exposure setting
When copying extremely light or dark originals, or originals with unequal
background density, the result may not meet your requirements (e.g. too much
background). In such cases you can adjust the exposure level. In the default
setting the exposure level indicator is in the neutral position see figure 7.
[7] Exposure setting
▼
▼▼
▼
Exposure setting
1
If the copy is too dark, you can modify the exposure level using the ‘lighter’
button.
2
If the copy is too light, you can modify the exposure level using the ‘darker’
button.
lighter
darker
roll 1 paper
manual feed
4
2
0
2
4
roll 2 film