42 Océ 7055/7056 User Manual
Clearing paper jams
When paper feeds incorrectly, the paper path indicator will flash.
▼
▼▼
▼
Clearing a paper jam in the copy material feed section
1
Switch off the copier.
2
Lower the copy feed table, using the two catches on the front underneath the
copy feed table (see figure 27).
[27] Lowering the copy feed table
3
Remove the jammed copy material.
Attention:
Pull the sheet of paper backwards carefully, the sheet might be
unfused on some parts.
Note:
Check thoroughly that no scraps of material are left behind.
4
Close the copy feed table.
5
Switch on the copier.
To Next Page
Loading...
