50 Océ 7055/7056 User Manual
Copy material that can be used
Océ copy machines and materials are matched for optimal quality and
performance. It is therefore recommended to use only approved Océ materials
in the Océ 7055/7056.
A full list of Océ materials suited for use in the Océ 7055/7056, including plain
paper, transparent paper, coloured papers and various polyester films is
available from your Océ representative. The maximum length of the copy
material is 175 m when you use 75 g/m
2
copy material and 150 m in case of
110 g/m
2
. The diameter of the roll holder equals 3 inch.
Attention:
Paper- and transparentmaterial is sensitive to high humidity. To
ensure optimal copy quality it is advised to keep the copy materials in the
packaging specially overnight.
Caution:
Materials which are metalbased or conductive are not designed to
use in this machine and may result in injury to the operator.
Attention:
If sheets of copy material are curled, feed them in with the curl
facing down, otherwise you will damage the drum.
Overview of copy material
Copy material Recommended
Plain paper 75 g/m
2
Transparent paper 110 g/m
2
Vellum 20 lbs
Polyester film 3.5 mil
ECO papers 75 g/m
2
Minimum Maximum
Width 297 mm 914 mm
Length 420 mm any manegeable length
To Next Page
Loading...
