Materials 35
Cleaning the transparent platen
If the transparent platen is dirty or static it should be cleaned to ensure top
quality copies. At the same time you can clean the white pressure platen
Attention:
To achieve the best results, we recommend the use of Océ cleaner
‘A’. (Codenr. 1068117; Cleaner kit).
▼
▼▼
▼
Cleaning the transparent platen and the pressure platen
1
Switch off the copier.
2
Open the top cover by pulling it towards you and raising the cover (see
figure 24).
[24] Opening the top cover
To Next Page
Loading...
