17
8 When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
(For Windows
®
XP)
(For Windows
®
98/98SE/Me/2000)
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine.
9 Plug in the power cord and turn on the
machine.
0 For Windows
®
98/98SE/Me/2000
Professional users, click Next.
For Windows
®
XP users, wait for a while
since the installation of the Océ drivers will
automatically start. The screens appear one
after another.
DO NOT try to cancel any of the
screens during this installation.
A When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
Océ recommends that you connect the
machine directly to your computer.
Continued ..
Installing the Drivers & Software
Network
Administrators
Setting Up
the machine
Windows
®
Parallel
To Next Page
Loading...
