21
Make sure that you have finished the instructions from Step 1 “Setting Up
the machine” on pages 4 - 11.
1 Turn off and unplug the machine from AC
outlet.
2 Connect the network cable to the machine,
and then connect it to a free port on your
hub.
3 Plug in the power cord and turn on the
machine.
4 Turn on your computer.
(For Windows
®
2000 Professional/XP/
XP Professional x64 Edition/
Windows NT
®
4.0, you must be logged on
with Administrator rights.)
Close any applications running before
installing the Multi-Function Suite.
5 Put the supplied CD-ROM into your CD-
ROM drive. If the model name screen
appears, choose your machine. If the
language screen appears, choose your
language.
6 The CD-ROM main menu will appear.
Click Install Multi-Function Suite.
7 After reading and accepting the ScanSoft
®
PaperPort
®
SE License Agreement, click
Yes.
The installation of PaperPort
®
SE will
automatically start and is followed by the
installation of Multi-Function Suite.
For Network Interface Cable Users
(For Windows
®
98/98SE/Me/NT/2000 Professional/XP/XP Professional x64 Edition)
Before installation, if you are using Personal
Firewall software, disable it. Once you are
sure that you can print after the installation,
re-start your Personal Firewall software.
If this window does not appear, use Windows
®
Explorer to run the setup.exe program from
the root folder of the Océ CD-ROM.
Continued ...
Installing the Drivers & Software
Windows
®
Network
Windows NT
®
4.0
Parallel
Windows
®
Network
Setting Up
the machine
Network
Administrators
To Next Page
Loading...
Need help?
General
