32
8 Choose Network and then click OK.
9 If you want to use the Scan key on the
machine, you must check Register your
computer with the "Scan To" functions
at the machine box and enter a name you
want to use for your Macintosh
®
in Display
Name. The name you enter will appear on
the machine’s LCD when you press the
Scan key and choose a scan option. You
can enter any name up to 15 characters
long.
(For more information on network scanning,
see Chapter 10 of the Software User’s
Guide on the CD-ROM.)
0 Click Browse.
A Choose your model name, and then click
OK. Click OK again to close the
DeviceSelector.
B Click Go, then choose Applications.
C Double-click the Utilities folder.
D Double-click the Print Setup Utility icon.
For Network Interface Cable Users
For Mac OS
®
X 10.2.x users, open Print
Center icon.
Step 2
Installing the Drivers & Software
To Next Page
Loading...
Need help?
General
