Why is punching not working on my Oce All in One Printer?
If punching does not occur when a saddle stitch finisher is installed on your Oce All in One Printer, ensure that the "Punch" checkbox is selected in the printer driver. Also, punching may be disabled in the administrator settings.
Why is not all of the image is printed by my Oce All in One Printer?
If not all of the image is printed by your Oce All in One Printer, it may be due to multiple applications running simultaneously. Close any unused applications and attempt to print again.
Why is my Oce im4512 All in One Printer asking for a password?
If your Oce All in One Printer is requesting a password, it's likely because a password was set for the retention function. A password is required to proceed with printing. If you don't know the password, printing cannot be executed.
Why is stapling not working on my Oce im4512?
If stapling does not occur with your Oce All in One Printer, stapling might be disabled in the administrator settings. Check with your administrator to see if "Disabling of Stapler" has been enabled. Also, verify that you are not trying to staple more than the maximum number of pages.
Why the Oce All in One Printer driver cannot be installed?
If your Oce All in One Printer driver cannot be installed, it may be due to insufficient free space on your hard drive. Delete unneeded files and applications to increase available space. Alternatively, the operating system you are using may not be supported. Ensure your OS is supported.
Why are the edges of the printed image missing on my Oce im4512?
If the edges of the printed image are missing when using your Oce All in One Printer, it could be due to the image overlapping the non-printable margins of the paper. Try adjusting the print area to fit within these margins.
How to resolve Oce im4512 All in One Printer write error when printing from USB?
If your Oce All in One Printer is experiencing a write error when printing from the USB port, the timeout setting for the printer driver might be too short. Try setting a longer timeout duration in the printer driver settings.
How to correct the orientation of the image on my Oce All in One Printer?
If the orientation of the image is incorrect on the print from your Oce All in One Printer, the print orientation settings in the printer driver may be incorrect. Correct the orientation settings directly in the printer driver.
Why is the printed image cut off by my Oce im4512?
If the printed image from your Oce All in One Printer is cut off, it is possible that an incorrect ratio has been selected. To resolve this, select a suitable ratio when printing.
How to fix Oce im4512 All in One Printer that prints in reverse order?
If your Oce All in One Printer prints in reverse order, the reverse page order setting might be enabled in your software application. Disable this setting in the application software to print in the correct order.
General| Brand | Oce |
|---|---|
| Model | im4512 |
| Category | All in One Printer |
| Language | English |
Provides instructions on how to safely turn the machine's power on and off.
Details the procedures for loading paper into the machine's various trays and the bypass tray.
Explains how to configure various machine settings, including paper tray, clock, and default settings.
Step-by-step guide on how to replace the toner cartridge when it is depleted.
Detailed instructions for removing paper misfeeds from various locations within the machine and peripherals.
Covers basic copying procedures, including using the document feeder and document glass.
Details procedures for cleaning the document glass and automatic document feeder to ensure print quality.
Provides solutions for common problems encountered during copying operations.
Details methods for saving files using Quick File, Filing, Print Jobs, and Scan Save functions.
Guides on searching for and performing operations like print, send, or property change on saved files.
Lists common problems and solutions related to the document filing function.
To Next Page
