Installation and Customization
U20944-J-Z247-6-7600
Syntax Rules for ROUTER control table
All parameters should be written in uppercase
All parameter values should be coded in uppercase, exception to this being the TCPIP
name parameter which can be coded in mixed case.
Each parameter must be coded on a seperate line.
End a group of parameters relevant for a particular destination by a semi colon
Comments should be coded on seperate lines and must begin with /*
ROUTER controls the parameters for syntax as the print device is started, giving
messages when errors are found for KEYWORDS, PARAMETERS to keywords and also
over GROUP validity.
TCPNAME(TCPIP);
/**UNIX BOX IN COMPUTER CENTRE************************
DEST(PRISMA1)
CLASS(ABC)
FORMS(UNIX)
IPADDR(160.120.17.233)
PORTNUM(6401)
RETRYINT(20)
RETRYNUM(2)
YEAR_
FORMAT(YYYY)
SEND_
REC_LENGTH(YES);
Figure 17: Example Router control table.
TCPNAME(tcpipname); Is the 1-8 character job name of the TCP/IP address
space.
(Optional, default is TCPIP).
This keyword must be terminated with a semicolon.
TCPNAME keyword is required only once within a router control file.
To Next Page
