Installation and Customization
U20944-J-Z247-6-7600
The following keywords make a routing group, as many groups as required can be
specified.
CLASS(classes) Up to eight class values. Each class is 1-alphanumeric
character.
(Optional).
However when not specified then DEST or FORMS
must be given.
DEST(destination names)
Up to eight destination names each being 1-8 characters
long, separated by a blank character.
(Optional).
However when not specified then CLASS or FORMS
must be given.
FORMS(form names)
Up to eight form names each being 1-8 characters long,
separated by a blank character.
(Optional).
However when not specified then CLASS or DEST
must be given.
IPADDR(Server ip address)
Is the address of the remote server system. Specify a
valid ip address in the format: nnn.nnn.nnn.nnn.
(Required).
PORTNUM(server port number) Is the port number used on the remote server system.
This parameter is required.
(Required).
RETRYINT(retry interval | 0)
Is the number of seconds between retries.
Valid range is a number 0-99999
(Optional, default is 0).
RETRYNUM(number of retries | 0)
Is the maximum number of times Router will retry a failed
transmission.
Valid range is a number 0-999
(Optional, default is 0).
SEND_REC_LENGTH(YES | NO)
whether or not each record is prefixed with a length field.
YES a 2 byte record length prefix is included for each
record.
To Next Page
Loading...
