8
The Way Of Installing Base:
II - Base Installation Guide
1.L oose the screws between the machine and stand (Figure 1).
2.R emove the 2 stands from the machine (Figure 2).
1.P lace the machine at on a desktop (Caution: put a foam cushion under the
machine to avoid it from scratching.)
2.A lign the screw holes on stand and TV bottom (Figure 2)
3.F ix the stand and the screen with 4 screws (Figure 3)
4.T he rendering after installed. (Figure 4)
Disassembly of the stand
Mounting of the stand
To Next Page
Loading...