Lastly, the chamber should be dried using the included bellows.
To do this, rest the bellows against one of the sample chamber’s
openings and then press the bellows to blow air through the
chamber (Fig. 27).
To prevent water flowing back into the chamber, it may be helpful
to insert tissue paper into the other opening of the sample
chamber in order to soak up the expelled water (Fig. 28).
Do not completely block the other opening with the
tissue paper. Air must be allowed to escape,
otherwise the high pressure might damage the
sample chamber, causing it to crack.
Figure 27. Drying the sample chamber with the bellows
Figure 28. Using a tissue to thoroughly dry the sample chamber
30
To Next Page
Loading...