! WARNING
Do not connect the negative lead of
the jumper cable to the negative
terminal of the battery in the vehicle.
● Be especially careful not to:
● Touch the positive lead of the jumper
cable to the negative lead.
● Reverse the polarity of the jumper
cables when connecting to the
batteries. This could cause the battery
to explode and severe injury.
Blown Fuses
All of the electrical circuits on your UTV
have fuses to protect them from damage
caused by excess current flow or
short-circuiting.
If something electrical on your UTV
stops working, the first thing you
should check for is a blown fuse (1).
Check all the fuses before looking
elsewhere for another possible cause
of the problem. Replace any blown
fuses and check component operation.
(1) Blown fuse
Fuse replacement
The main fuse and the fuse box are
To Next Page
Loading...
Need help?
General