CLEANING AND
STORAGE
CLEANING
Frequent, thorough cleaning of your
vehicle will not only enhance its
appearance, but also improve its
general performance and extend the
useful life of many components.
1. Before cleaning the vehicle:
A. Block off the end of the exhaust
pipe to prevent water entry using
a plastic bag and a strong rubber
band.
B. Make sure the spark plug and all
filler caps are properly installed.
2. If the engine case is excessively
greasy, apply degreaser with a
paintbrush. Do not apply degreaser to
the wheel axles.
3. Rinse the dirt and degreaser off with a
garden hose. High pressure water is
not necessary.
CAUTION:
Excessive water pressure may cause
water seepage and deterioration of
wheel bearings, brakes, transmission
seals and electrical devices. Many
expensive repair bills have resulted
from high-pressure detergent
applications such as those available in
To Next Page
Loading...
Need help?
General