located under the hood. If a fuse is
blown, turn off the key switch and install
a new fuse of the specified amp. If a
fuse is blown, replace it as follows.
1. Remove the fuse box compartment
cover by lifting up on the lid.
2. Turn the key to “OFF” and turn off the
electrical circuit in question.
CAUTION:
To prevent accidental short- circuiting,
turn off the main switch when checking
or replacing a fuse.
3. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
Recommended Fuses
（1）Speed power、rear brake light、headlight and fan
power
（2）ECU and speed sensor
（3）Footbrake switches
（4）2WD/4WD drive switch、main relay
（5）Supplely power
（6）Spare fuse
（7）Spare fuse
（8）Main relay
（9）Fan relay
（10）Fuel pump relay
To Next Page
Loading...