Jump-starting
Jump-starting the vehicle should be
avoided. The battery should be
removed and charged instead.
However, if the vehicle must be
jump-started, proceed as follows:
1. Turn the key to “OFF”.
2. Open the hood. Remove the battery
compartment cover.
3. Using a charged 12V battery,
connect the positive lead of the
jumper cable to the positive terminal
on the battery in the vehicle and the
other end of the positive lead to the
positive terminal of the charged battery.
1. Jumper cable positive lead
2. Jumper cable negative lead
4. Connect the negative lead of the
jumper cable to the negative terminal
of the negative lead to an unpainted
metal surface of the vehicle.
To Next Page
Loading...
Need help?
General