! WARNING
Do not connect the negative lead
of the jumper cable to the negative
terminal of the battery in the
vehicle.
● Be especially careful not to touch
the positive lead of the jumper
cable to the negative lead or not to
reverse the polarity of the jumper
cables when connecting to the
batteries-battery, explosion and/or
serious damage to the electrical
system may occur.
5. Start the engine.
6. After the engine starts, disconnect
the negative lead of the jumper cable
from the vehicle and charged battery,
then disconnect the positive lead of the
jumper cable from the charged battery
and the battery in the vehicle.
7. Install the battery compartment cover.
8. Put the seat back in place.
Warming up
To get maximum engine life, always
warm up the engine before starting off.
Never accelerate fast with a cold
engine!
To Next Page
Loading...
Need help?
General