Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off
the gas pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice
versa by moving the drive select
lever along the shift guide.
4. Check behind for any people or
obstacles, and then release the
brake pedal.
5. Press the gas pedal gradually and
continue to watch to the rear while
backing.
NOTE:
● When in reverse, the revere
indicator light should be on. If the
light does not come on, ask a dealer
to inspect the reverse indicator light
electrical circuit.
● Due to the synchronizing
mechanism in the engine, the light
may not come on until the vehicle
starts moving.
! WARNING
POTENTIAL HAZARD
Improperly operating in reverse.
WHAT CAN HAPPEN
You could hit an obstacle or person
behind you, resulting in serious
injury or death.
To Next Page
Loading...
Need help?
General