the instrument panel. Secure slots ③ on
the side of the hood around projections
④ on the frame.
CAUTION:
● Make sure that all cables and wires
are in place when closing the hood.
● Do not drive the vehicle with the
hood open, unlatched, or removed.
1. Projection (x2) 2. Slot (x2)
3. Slot (x2) 4. Projection (x2)
Console
To install
1. Place the console in its original
position.
2. Install the parking brake lever boot.
3. Install the seats.
CAUTION:
● Be careful not to pinch the wires or
cables when installing the console.
● Make sure that the groove at the
bottom of the parking brake lever
boot and the drive select lever
boot fits securely around the edge
of the hole in the console.
To Next Page
Loading...