1. Oil filter
2. O-ring
3. Oil filter cover
Screw oil filter cover in place.
Wipe out any oil spillage on engine.
Change gasket on oil drain plug. Clean
gasket area on engine and oil drain
plug then reinstall plug. Refill engine at
proper level with the recommended oil.
Refer to SPECIFICATIONS for
capacity.
Start engine and let it idle for a few
minutes. Ensure oil filter area and oil
drain plug areas are not leaking.
Stop engine. Wait a while to allow
oil to flow down to the crankcase
then check oil level. Refill as
necessary. Dispose of oil as per
your local environmental regulations.
Engine Coolant
Recommended coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors
specifically for internal combustion
aluminum engine. Cooling system must
be filled with premixed coolant.
Coolant level
WARNING
Check coolant level when engine is
cold. Never add coolant in cooling
system when engine is hot.
To Next Page
Loading...
Need help?
General