3. Remove the spark plug and pour
about one tablespoon of SAE
10W30 or 20W40 motor oil in the
spark plug. Ground the spark plug
wire and turn the engine over
several times to coat the cylinder
wall with oil.
4. Lubricate all control cables.
5. Raise the frame so that all wheels
are off the ground.
6. Tie a plastic bag over the exhaust
pipe outlet to prevent moisture
from entering.
7. If storing in a humid or salt-air
atmosphere, coat all exposed metal
surfaces with a light film of oil. Do not
apply oil to any rubber parts or the seat
covers.
8. Remove the battery and charge it.
Store it in a dry place and recharge it
once a month. Do not store the battery
in an excessively warm or cold place
(less than 0℃ (30℉) or more than 30℃
(90℉)).
NOTE:
Make any necessary repairs before
storing the vehicle.
To Next Page
Loading...
Need help?
General