Place transmission on PARK position.
Remove the cleanout plug of the
muffler.
Block the end of the muffler with a shop
rag and start the engine.
Momentarily increase engine RPM
several times to purge accumulated
carbon out of the muffler.
Stop engine and allow muffler to cool.
Reinstall the cleanout plug.
Radiator
Periodically check the radiator area for
cleanliness.
1. Coolant reservoir
2. Radiator
Inspect radiating fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator to cool properly.
Remove as much deposits as you can
with your hands. If water is available in
proximity, try rinsing the radiating fans.
If available, use a garden hose to rinse
the radiating fins.
WARNING
Never clean the radiator with
your hands when it is hot. Let
the radiator cool down before
cleaning.
CAUTION: Be careful not to damage
the radiating fins when cleaning. Do not
use any object/tool that could damage
the parts to allow efficient cooling.
When hosing use low-pressure water
only. See an authorized ODES dealer
To Next Page
Loading...
Need help?
General