To wear the seat belt properly, do the
following:
1. Hold the latch plate as you pull the
belt across your lap and chest. Make
sure the belt is not twisted and is not
caught on any portion of the vehicle,
your clothing, or any equipment you
are carrying.
2. Push the latch plate into the buckle
until it clicks. Pull up on the latch
plate to make sure it is secure.
1. Buckle 2. Latch plate
3. Put the lap portion of the belt low on
your hips. Push down on the buckle
end of the belt as you pull up on the
shoulder part so the belt is snug across
your hips.
4. Position the shoulder belt over your
shoulder and across your chest. The
shoulder belt should fit against your
chest. If it is loose, pull the belt out all
the way and then let it retract.
5. To release the buckle, firmly press
the release button.
1. Buckle 2. Release button.
To Next Page
Loading...
Need help?
General