Odys PDV 67003 - 9 System Settings

ODYS PDV 67003 DVB-T
48
EN
9 System settings
In this section, you will learn how to customize the default settings of
the system according to your needs.
Note
Only change the system settings if there is no disc in the DVD
player or if the DVD player is not in operation.
To change your system settings, proceed as follows:
1
Press the SETUP button on the remote control or on the DVD
player.
2
The Setup menu is displayed. In this menu, you can define general
settings, loudspeaker settings, Digital settings as well as other
default settings. You can leave the Setup menu at any time by
pressing the SETUP button again.
3
Use the

and

buttons on the remote control or on the DVD
player to select the desired submenu.
4
Use the

and

buttons on the remote control or on the DVD
player to select the desired option within the submenu.