ODYS PDV 67003 DVB-T
27
EN
6.2 TV programme selection and video text
TV programme selection
1
Exit setup mode by pressing the SETUP button.
2
Press the 0-9 and +10 number keys on the remote control to select
the desired TV programme.
3
You can also switch to the stored TV programmes going both
forwards and backwards in succession using the or CH+ and
CH- buttons.
4
Set a suitable volume using the volume control on the ride side of
the device.
Video text
1
Press the TELETEXT button on the remote control to switch to the
video text.
2
Enter the three-digit number for the desired video text page directly
using the key numbers 0-9.
3
You can also navigate through the available video text pages as
follows:
100 pages down
100 pages up
One page up
One page down
4
To return to normal TV operation, press the TELETEXT button
again.
6.3 Additional DVB-T settings
1. Programme guide
Press the SETUP button again. Press to select the “Programme
guide” option, confirm using ENT or ENTER. The following menu is
displayed:
To Next Page
Loading...
