Odyssey 7 - Input Status (Rec Mode Only)

MENU SYSTEM
INPUT STATUS (RECORD MODE ONLY)
29.97 4K
S-LOG2
Displays current video input signal type. Tapping button brings up detailed information on
Input and Output signals, record mode and frame rates.
INPUT CONTROL SETTINGS
VIDEO CADENCE:
This identies the cycling of the signal coming into the
Odyssey and how it is to be recorded.
AVAILABLE CADENCES:
PROGRESSIVE/PSF: For video signals structured
as True Progressive (p) or Progressive Segmented
Frames (PSF).
INTERLACED: For HD video signals structured as
interlaced elds (i). Records a 1080i60 video signal
without alteraon. Note that some cameras carry
progressive video embedded within an interlaced
signal. See 3:2 Pulldown below.
REMOVE 3:2 PULLDOWN (TO 24P): For 24p video
signals striped within a 60i signal. Extracts the 24p
video, records it as 1080p24 and discards the excess
elds for greater eciency and smoother post.
TIMECODE SOURCE:
Allows selection for origination of timecode. Note that
some video sources do not carry timecode data and at
high frame rates some cameras do not generate timecode.
In these cases the Odyssey7 will generate a Record Run
timecode from its internal clock. LTC not supported when
recording ARRIRAW.
AVAILABLE TIMECODE SOURCES
SDI/HDMI (embedded in incoming signal)
TC (input from external source to LTC port)
TIME-OF-DAY NDF (Odyssey internal clock, non-drop
frame counng)
TIME-OF-DAY DF (Odyssey internal clock, drop frame
counng)
SEED/RECORD RUN (Set mecode counter,
increments while recording)
OUTPUT CONTROL SETTINGS
VIDEO PSF OUT
This control available in select modes. On/Off control to
switch video outputs from the Progressive (P) to Progressive
Segmented Frames (PSF) signal structure. This improves
compatibility with some third-party equipment.
OVERLAYS
On/Off control to replicate OLED Image Analysis tools
display over the image on the SDI and HDMI output.
20