Need help?Do you have a question about the Odyssey 7 and is the answer not in the manual?
General| Resolution | 1920x1080 |
|---|---|
| Supported Codecs | H.264 |
| Power | 12V DC |
| Video Compression | H.264 |
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| Display | 7-inch LCD |
| Video Output | HDMI, VGA |
| Recording Media | HDD |
| Remote Viewing | Yes |
Details the key features and capabilities of the Odyssey7 monitor/recorder.
Comprehensive technical specifications for the Odyssey7 unit, including display, I/O, and performance metrics.
Describes the connector ports located on the bottom side of the Odyssey7 unit.
Details the SSD slot and its location on the top of the Odyssey7 device.
Explains the function of the F1 LOCK and F2 SHUT DOWN buttons on the left side.
Details the USB, HDMI OUT, and RMT ports on the right side of the unit.
Information on the threaded sockets for mounting the Odyssey7 unit.
Technical diagrams showing the physical dimensions and port locations of the Odyssey7.
Instructions for registering and activating the Odyssey7 unit for full functionality.
Steps for powering on and initializing the Odyssey7 device upon first use.
Recommended procedure for safely shutting down the Odyssey7 to prevent data corruption.
Overview of the touchscreen interface and its controls for navigation and operation.
Introduction to the Odyssey7's menu system for accessing settings and configurations.
Explanation of the device's default demo mode and its limitations.
Accessing basic device settings, info, and SSD management.
Configuring camera, codec, cadence, timecode, triggers, and project rate.
Controls and status indicators for recording operations via the upper tool bar.
Accessing and configuring OLED display, Focus Assist, LUTs, Zebra, Waveform, Histogram.
Interface for playback controls, playlist management, and media scrubbing.
Procedures and recovery mechanisms for handling power loss during recording.
Information on SSD read rates and recommended configurations for optimal performance.
Steps for safely ejecting SSDs and downloading media files to a computer.
Tool for copying, merging, and optimizing Apple ProRes files for editing and playback.
Details on recording codecs like ProRes 422 (HQ), 422, and 422 (LT) for high-quality compressed video.
List of software applications that natively support Apple ProRes files from the Odyssey.
Information on post-production systems and NLEs compatible with Odyssey recorded files.
Overview of the directory structure for recorded clips on the SSD.
Overview of proprietary accessories available from Convergent Design.
Details on accepted DC power input ranges and the included AC power supply.
List of available power cables for connecting various battery types to the Odyssey.
Various battery plates offered to adapt different camera batteries for use with the Odyssey.
Battery plates designed to hold and power Teradek Bolt receivers along with the Odyssey.
A sunshade accessory designed to improve screen visibility in bright conditions.
A stand for the Odyssey that aids in viewing and cable management.
Information on the custom-foam Nanuk case for protecting the Odyssey and its accessories.
Description of a flexible and lightweight SDI cable for camera installations.
A drive for firmware updates and utility functions, not for video recording.
Adapter for connecting Odyssey SSDs to computers via USB 3.0 for file downloading.
Kit for mounting one or two Odyssey units in a standard equipment rack.
Protective clear shields for the Odyssey's screen, including labeling.
Cloth for cleaning the Odyssey screen.
A pushbutton trigger accessory for remote start/stop recording control.
Information on third-party accessories and their availability through manufacturer dealers.
Details on SATA adapters like Thunderbolt and USB 2.0/3.0 for connecting SSDs.
Release notes for firmware version 5.10.100, detailing new features and improvements.
New features specific to the Odyssey7Q+ model in firmware 5.10.100.
New features for Odyssey7Q and Odyssey7Q+ models in firmware 5.10.100.
Added ProRes support for FS7/FS700 when using the record option.
High-speed burst ProRes recording for FS700 in 2K/HD formats.
Added ProRes support for Canon C500 when using the RAW record option.
General new features applicable to all Odyssey models in firmware 5.10.100.
Confirmation that the Odyssey supports the remote trigger accessory.
List of bug fixes and performance enhancements in firmware 5.10.100.
Information on third-party workflow guides and software compatibility.
Utility for recovering files from Convergent Design SSDs, even without safe eject.
List of known issues and limitations identified in firmware 5.10.100.
Release notes for firmware version 4.10.100, detailing new features and improvements.
List of bug fixes and performance enhancements in firmware 4.10.100.
List of known issues related to Audio, Monitor, Play, and Record functions.
Information on how to find release notes for previous firmware versions.
To Next Page
