MENU SYSTEM
TIMECODE (ALL MODES)
00:12:16:04
At the center of the Lower Tool Bar is a counter displaying timecode. This counter displays
hours, minutes, seconds and frames in the format 00:00:00:00.
SCRUB BAR (PLAY MODE ONLY)
Activated by toggling the TOOLS/SCRUB Button. The lower right tool bar is a bar that represents the full video le. The
number on the left notes the time within the video le currently cued. The number on the right indicates the total time
of the clip. A vertical line graphically represents the cue point within the le.
05:59 | 14:55
Drag a nger across the bar to move through the le. A nger dragged on the video image area itself is a more ne-
tuned control. To play the le from the selected point, use the deck controls.
32
To Next Page
Loading...
