OHAUS AB23PH - 6 Technical Data; Specifications

EN-16 AB23PH Bench pH Meter
 Or press the Exit button to quit the setting, display then turn off the meter.
6. TECHNICAL DATA
6.1 Specifications
Equipment Ratings:
Indoor use only
Altitude:
2000m
Operating temperature:
5 to 40°C
Humidity:
Maximum relative humidity 80% for temperatures up to
31 °C decreasing linearly to 50% relative humidity at 40°C.
Electrical supply:
12VDC, 0.1A. (For use with certified or approved power supply,
which must have a SELV and limited energy output.)
Voltage fluctuations:
Mains supply voltage fluctuations up to ±10% of the
nominal voltage.
Overvoltage category
(Installation category):
II
Pollution degree:
2
Benchtop Meter Model
a-AB23PH
Display Type
5" segment LCD with backlight
Measurement Channels
1
Measurement End-point
Modes
Auto-stop, Continuous
Datalog for Measurement
99 sets
Datalog for Calibration
Last calibration
Keypad
Membrane
pH Electrode Input
BNC
Temperature Input
Cinch, NTC 30 kΩ
Power Supply
Power input: 100-240V~ 200mA 50-60Hz 12-18VA
Power output: 12 VDC 0.5A
Net Weight
2.5 kg
Gross Weight
2.8 kg
Transportation Size
370 x 268 x 251 mm