EN-10 BW SERIES COMPACT BENCH SCALE
6.2 Legal for Trade SealIng
After the scale has been found to comply with local regulations by relevant approving
authorities, the scale may be sealed in the following manner:
Lead and Wire Seal.
Secure sealing plate with through-hole screws. Run the wire seal into the through-
holes then press the lead seal in place.
Sticker Seal.
Secure sealing plate with regular pan-head screws then apply the sticker over one of
the screws.
Through-hole Screws
Lead Seal
Sealing Plate
Sticker Seal
Sealing Plate
To Next Page
Loading...
