Why does the battery fail to charge fully on OHAUS EB15?
If the battery in your OHAUS Scales fails to charge fully, it may be defective or past its useful life. Replace the battery through an authorized service dealer.
What to do if OHAUS EB15 Scales does not respond to front panel controls?
If the OHAUS Scales does not respond to front panel controls, the Membrane Switch might be defective. Test the Membrane Switch as described in Section 3.2 and replace it if necessary. Alternatively, the Main PC Board could be defective. Test the Main PC Board as described in Section 3.4, and if defective, replace it.
How to troubleshoot OHAUS Scales that will not turn on using battery power?
If your OHAUS Scales will not turn on using battery power, the battery may be discharged or defective, so test the battery as described in Section 3.5 and replace it if needed. Another possible cause is a defective wiring harness or broken battery clip connection; open the scale and check the voltage at the battery contacts first. A defective Membrane Switch could also be the reason, so test and replace it as per Section 3.2 if necessary. Lastly, the Main PC Board might be defective; test it according to Section 3.4 and replace if defective.
Provides a description of the EB Series as an economical, compact bench scale for industrial weighing.
Lists key features like capacity, resolution, pan material, display type, application modes, and battery life.
Details critical safety guidelines for operating the scale correctly and preventing hazards.
Instructions to unpack the scale and verify all included components are present.
Guide on attaching the weighing platform and removing the shipping protection screw.
Advice on choosing a stable, level environment free from interference for accurate operation.
Procedure for adjusting the leveling feet to ensure the bubble is centered.
Covers connecting the AC adapter and information on the internal rechargeable battery status and usage.
Recommendation to perform span calibration upon first use for accurate weighing.
Identifies and explains the meaning of various symbols shown on the scale's display.
Details the function of each button on the scale and how to use basic operations.
Instructions for powering the scale on and off, including warm-up recommendations.
Explains how to set a tare value to exclude the weight of a container.
How to reset the display to zero using the ZERO button.
Guide to cycling through and selecting different units of measurement.
Instructions for using the scale's check-weighing, counting, and percent modes.
Steps for sampling items to calculate the average piece weight for counting applications.
How to view piece count, APW, and total weight during counting operations.
Using the M+ key to accumulate multiple weights or counts into memory.
Procedure for performing percent weighing by setting a reference weight.
Setting the scale's readability or graduation for displayed values.
Configuring the display backlight activation mode (Auto, On, Off).
Adjusting the range for maintaining the scale's zero reading.
Setting the filtering level to affect stabilization time and stability indication.
To Next Page
General
