OHAUS PR2202/E - Balance Setup Options

PR Series Balance EN-17
5.3 Balance Setup
Enter this sub-menu to customize the balance functionality.
Note: The factory default settings are shown below in bold.
5.3.1 Filter Level
Set the amount of signal filtering.
Low = faster stabilization time with less stability.
Medium
= normal stabilization time with normal stability.
High = slower stabilization time with more stability.
Low
Medium
High
5.3.2 AZT (Auto Zero Tracking)
Set the automatic zero tracking functionality.
Auto Zero Tracking
Off = disabled.
0.5d =
display maintains zero up to a drift of 0.5 graduation per second.
1d
= display maintains zero up to a drift of 1 graduation per second.
3d = display maintains zero up to a drift of 3 graduations per second.
0.5 d
1 d
3 d
5.3.3 Auto Tare
Set the automatic tare.
When Automatic Tare is set to On, the first object placed on the pan will be
deemed as a container and tared
automatically.
Off
= disabled.
On = enabled.
Auto Tare
Off
On
HIGH
mMed
LowW
ON
OFF
A.tArE
AZt
3 d
1 d
0.5 d
FiltEr