OHAUS PR2202/E - Print Settings

EN-22 PR Series Balance
5.5.2 Transmission
Set the data bits, stop bit, and parity.
8
-N-1 = 8 data bits, no parity, stop bit 1
8-N-2 = 8 data bits, no parity, stop bit 2
7-E-1 = 7 data bits, even parity, stop bit 1
7-E-2 = 7 data bits, even parity, stop bit 2
7-N-1 = 7 data bits, no parity, stop bit 1
7-N-2 = 7 data bits, no parity, stop bit 2
7-O-1 = 7 data bits, odd parity, stop bit 1
7-O-2 = 7 data bits, odd parity, stop bit 2
Parity
8 data bits, stop bit 1
5.5.3 Handshake
Set the flow control method.
NONE = no handshaking
XON
-XOFF = XON/XOFF handshaking
HARDWARE = hardware handshaking
Handshake
None
Xon / Xoff

Hardware
5.6 Print Settings
Enter this sub-menu to customize data transfer settings.
5.6.1 Stable Only
Off = values are printed immediately regardless of stability.
On
= values are printed only when the stability criteria are met. 





Parity
8-N-1
H.ShAkE
HRrdwW
NONE
Stable
Print
ON-OFF