OHAUS PR2202/E - Page 41

PR Series Balance EN-39
Command
Function
...
U
Scroll to the next enabled unit.
ON
Brings out of Standby
OFF
Goes to Standby.
C
Begin Span Calibration
IC
Begin Internal Calibration.
AC
Abort Calibration.
PSN
Print Serial Number.
PV
Print Version: print name, software revision and LFT On (if LFT is set On).
x#
Set Counting APW (x) in grams. (must have APW stored)
P#
Print Counting application APW.
x%
Set Percent application reference weight (x) in grams. (must have reference weight stored)
P%
Print Percent application reference weight.
PTIME
Print current time.
PDATE
Print current date.
xTIME
Set Time x format: hh:mm:ss
xDATE
Set Date x format: mm/dd/yyyy
xS
0 = print unstable data, 1 = print stable only
xRL
Enable or disable OK response to non-print commands: x=0 to disable, x=1 to enable.
xT
Pre-tare the container weight (x) in grams.