What does 'Lo.ref' mean on OHAUS Scout SPX1202?
If your OHAUS Scales display 'Lo.ref', it means the Percent Reference weight or APW is too low for accurate results. Increase the reference weight or APW.
What does 'USB.Err' mean on OHAUS Scout SPX1202?
If your OHAUS Scales display 'USB.Err', it means that the menu or app file cannot be found in the U-disk. Check the U-disk to ensure it contains the required files.
General| Capacity | 1200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD with backlight |
| Calibration | External Calibration |
| Linearity | ± 0.02 g |
| Repeatability | ± 0.01 g |
| Interface | RS232 |
| Auto-Off | Yes |
| Overload Protection | Yes |
| Power Supply | AC adapter (included) or 4 AA batteries (optional) |
| Stabilization Time | 1.5 sec |
| Operating Temperature Range | 10°C to 40°C |
| Weighing Units | g, oz |
To Next Page