EN-10 SD SERIES BENCH SCALE
Model SD35 SD75 SD200
Capacity x Readability 35 x 0.02kg
77 x 0.05lb
75 x 0.05kg
165 x 0.1lb
200 x 0.1kg
440 x 0.2lb
Weighing Units kg, lb
Modes Simple Weighing, Dynamic Weighing
Calibration Weights 25kg/50lb 50kg/100lb 100kg/200lb
Stabilization Time Within 3 seconds
Zero Range To capacity by subtraction
Maximum Overload 150%
Error Indications: “E”
“CALE”
“UnSt”
“ErrE”
“Lo bat OFF”
“Lo Line OFF”
- Over load, Under load, Power on Over/Under load
- Calibration Error
- Unstable at Power on
- Memory Error
- Low battery shut down
- Low line voltage shut down (Power Adapter)
Underload Indication Negative value
Auto Shut-Off 4 minutes no activity (battery operation only)
Battery Operating Time 360 hours
Operating Temperature
Range
41° to 104° F / 5° to 40°C at 10% to 80% relative humidity,
non-condensing
Cable Length 1.8m / 72” (uncoiled)
Display 4 Digit, LCD, 0.8”/20mm high
Scale Base Size 316mm L x 280mm W x 45mm H /
12.4” x L x 11” W x 1.77” H
Indicator Size 210mm L x 91mm W x 39mm H / 8.27” L x 3.58” W x 1.54” H
Battery power requirements 3 “C” Alkaline batteries (LR14)
AC Adapter 9-12 Volt DC, 100mA
Net Weight
2.6kg / 5.8lb
3.3kg / 7.3lb
Shipping Weight
3.7kg / 8.1lb
4.3kg / 9.5lb
Shipping Carton Size
380mm L x 100mm W x 465mm H / 15” L x 3.94” W x 18.3” H
Specifications (Standard Base Models)
To Next Page
Loading...
