OHAUS STARTER 300 - Installation; Battery Installation

5
2 Installation
Carefully unpack the meter.
2.1 Package contents
The model ST300-B has the following items:
In addition to ST300-B package content, the model ST300 package also includes the following:
2.2 Installing the batteries
1) Remove the battery cover screw and remove the battery cover
2) Insert the batteries in the battery compartment as shown
3) Replace the battery cover and tighten the battery cover screw
2.3 Installing the electrode clip
ST300-B
Units
STARTER 300 meter
1
AAA battery
4
Electrode Clip
1
IP54 electrode caps
1 set
Wrist Strap
1
pH Buffer Power Set (4.01, 7.00, 10.01)
1 set
ST320 3-in-1 gel pH electrode
1