Oki B4100 Setup Guide

English 8
Insert Power Cable
Insert the power cable.
Note: Do NOT turn the printer on.
WARNING!
Be sure to use the 15A AC power cord supplied
with the printer. Use of a power cord NOT
supplied with this printer, or an extension cord,
may result in overheating, and could be a safety
hazard.
CAUTION!
To prevent fire or shock hazards, connect
the power plug only to a properly rated
power outlet.
Do not connect this product to an
uninterruptible power supply (UPS). For
further information please contact Oki Data
at 1-800-OKIDATA or www.okidata.com.
Computer Connection
Note: Interface cables are not supplied.
Network Connection
Connect the network cable between the printer
network port and the Ethernet hub or router.
USB Connection
Note: If installing for Windows© with USB
connection, install the software BEFORE
installing the USB cable. See “Software
Installation” on page 9.
Connect the USB cable between the printer USB
port and the computer.
Parallel Connection
Note: Requires UL approved bi-directional (IEEE
1284 compliant) cable.
Connect the Parallel cable between the printer’s
Parallel port and the computer.

Oki B4100 Specifications

Performance

print speed	19 pages per minute
CPU	200 MHz
time to first page	6.0 seconds
print resolution	1200 x 600 dpi
duty cycle	15, 000 pages per month

Memory

standard RAM	8 MB
maximum RAM	8 MB

Paper Handling

standard paper input	250-sheet Letter/Legal/Universal tray
paper size minimum	3.4" x 5.5"
paper size maximum	8.5" x 14"

Weight and Dimensions

size (WxDxH)	14" x 15.6" x 7.9"
size (WxDxH in cm)	35.5 cm x 39.5 cm x 20 cm
weight	22 lb. (10.0 kg)