Oki B430 User Manual

Appendix D Network Interface
43984801TH Rev.1
167 /
Oki Data CONFIDENTIAL
c) FTP
FTP i
s an application to process the print data.
The FTP of this system supports multiple clients. Also, it provides multiple connections to each
client.
d) Telnet
Tel
net is an application to perform the menu reference/ change of the network / printer.
Telnet of this system supports simultaneous connection of multiple clients which are individual
users.
e) HTTP
HTT
P is an application to perform reference/ change of the network/ printer.
HTTP of this system supports simultaneous connection of multiple clients which are individual
users. In addition, it offers multiple connections to one client.
f) SNMP
SNM
P is an application to perform reference/ change of the network/ printer.
SNMP of this system supports simultaneous connection of multiple clients which are individual
users. In addition, it offers multiple connections to one client.
Item Factory Default Setting Range Contents
The number of connection
clients
1 to 8 clients It shows the number of simultaneous
connectable clients. Up to 8clients can
be connected at the same time.
Item Factory Default Setting Range Contents
The number of connection
clients
1 client It shows the number of simultaneous
connectable clients
.
Terminal mode VT-100 VT-100 It shows the control mode of the
connection client terminal. VT-100 is
only support terminal mode.
The number of columns 80 columns 80 columns It shows the number of digits of
the connection client terminal. The
supported digit number is fixed to 80.
The number of lines 25 lines 25 lines It shows the number of digits of
the connection client terminal. The
supported digit number is fixed to 25.
Idling time completion 300 seconds 60 to 7200
seconds
It shows the idling time completion of
connection client.
Item Factory Default Setting Range Contents
HTTP version 1.0 1.0 It shows the version of HTTP in
executing.

Oki B430 Specifications

General

Brand	Oki
Model	B430
Category	Printer
Language	English