Oki B4350n

Control Codes: PCLXL • 30
Configuration/ Status
SetClipIntersect 67 Define an imaging
Session
ClipRegion 53
Configuration/ Status
SetClipRectangle 68 Set the clip region to the
rectangle area
ClipRegion
Boundingbo
53
42
Configuration/ Status
SetClipTopPag 69 Limit the clip path to the
current page
——
Configuration/ Status
SetPageDefaultCTM 74 Reset the coordination
transformation matrix
——
Configuration/ Status
SetPageOrigin 75 Set the origin coordinates PageOrigin 2A
Configuration/ Status
SetPageRotation 76 Rotate the page
coordinate system
PageAngle 29
Configuration/ Status
SetPageScale 77 Scale the page coordinate
system
PageScale 2B
Configuration/ Status
SetClipMode 7F Set the clip path mode ClipMode 54
Configuration/ Status
SetPathToClip 80 Replace the current path
by the clip path
——
PCLXL Control Codes (continued)
Group Operator Code Description Atributes Code