Using Storage Device Manager: Storing PCL Macros • 7
Storing PCL Macros
Storage Device Manager allows you to store PCL
Macros on the printer’s Flash Memory. It does not
create PCL Macros.
Note: To create Macro Overlays, use common PCL
Macro Overlay software or form creation
software.
To see a listing of the forms that are stored on the Flash
DIMM, generate a File List (see page 10).
Downloading PCL Macros to the Printer
Important!
It is highly recommended that anyone creating PCL
macros be experienced with PCL macro commands. If
the macro commands are not set properly, you may not
achieve the desired print result.
Step 1: Create a New Project
With Storage Device Manager open and the printer icon
highlighted:
1. Click Projects → New Project.
The Project dialog box opens.
2. Click Projects → Save Project, then enter the path/
name for storing the project on your computer’s hard
drive or on your network.
3. Click Save.
To Next Page
Loading...
Need help?
General
