Using Storage Device Manager: General Information • 4
Using Storage Device Manager
Important!
The Flash DIMM option kits allow downloading PCL
fonts and forms to the printer. How these fonts and
forms are used in printed documents depends on the
particular operating system and software application in
use. This requires programming experience and an
understanding of embedding control codes, which is
beyond the scope of this software and documentation.
General Information
Note: Storage Device Manager requires Microsoft
Internet Explorer 4.0 or higher to run.
Storage Device Manager (SDM) provides a means of
managing the Flash memory, including
• downloading PCL fonts and forms
• deleting files
• printing lists of fonts and files on the Flash Memory
•etc.
To Open Storage Device
Manager
1. Click Start → Programs → Okidata → Oki
Storage Device Manager → Oki Storage Device
Manager.
2. Select the appropriate printer connection (parallel,
USB, or IP), then click Start.
The printer is detected and an icon appears at the
bottom of the Storage Device Manager screen.
3. Click Exit.
On-Line Help
In the main Storage Device Manager screen, click
Help → Help Topics.
To Next Page
Loading...
Need help?
General
