Control Codes: PJL • 40
Returns values within PJL INQUIRE[LPARM:personality] variable Returns Menu set values
DINQUIRE[LPARM:personality]
variable
Returns current printer setup for current PJL values, PJL setting and
selection range
INFO category
Returns the same character strings as received <Words> to Host ECHO[<Words>]
Designates settings of the command that returns status voluntarily from
Printer to Host
USTATUS variable=value
Clears the state in which status is voluntarily returned from Printer to Host. USTATUSOFF
Displays a designated message on Control Panel OPMSG DISPLAY="message"
Displays a designated message on Control Panel instead of READY
message.
RDYMSG DISPLAY="message"
Displays a designated message on Control Panel and sets the printer Off-
line.
STMSG DISPLAY="message"
PJL Commands (continued)
Function Code
To Next Page
Loading...
