Control Codes: SIDM Commands Summary • 53
Cancel Super/Sub Script Mode ESC T
Turn Uni-Directional Mode On/OFF ESC U pn Trap
Turn Double Wide Mode ON/OFF ESC W pn
Select High Speed Double Density Graphics ESC Y ln hn data
Select Quadruple Density Graphics ESC Z ln hn data
Select Relative Position ESC \ ln hn
Select 9pin Graphics ESC ^ pm ln hn data
Select Justification ESC a pn Trap
Set VT in Channels ESC b pm pn1..pnk NUL
Set Relative tab stop ESC e pn1 pn2 Trap
Set relative print position ESC f pn1 pn2 Trap
Select 15CPI ESC g Trap
Turn incremental print Mode ON/OFF ESC i pn Trap
Perform n/216" Reverse LF ESC j pn
Epson FX Control Codes (continued)
Function Command Sequence Remarks
To Next Page
Loading...
