B6500 User’s Guide> 131
Cleaning the Printer
This section describes how to clean the printer in order to maintain
it in good condition and print clean printouts all the time.
Be sure to switch off and unplug the machine before
accessing the interior of the machine for cleaning,
maintenance, or fault clearance. Access to a live machine’s
interior can cause electric shock.
Cleaning the Exterior
Clean the exterior of the printer about once a month. Wipe the parts
with a wet but well-wrung soft cloth. Then wipe with another dry soft
cloth. For stubborn stains, moisten a soft cloth with a small amount
of neutral detergent, and gently wipe the stain off.
Important:
• Do not spray the detergent directly on the printer. The liquid
detergent may enter the printer through a gap and cause
problems. Never use cleaning agents other than water or
neutral detergent.
Cleaning the Interior
After clearing paper jams or replacing the drum/toner cartridge,
inspect the inside of the printer before closing cover A.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
