B6500 User’s Guide> 74
USB Menu
The USB Menu provides access to the USB settings. Use the
following procedure to enter the USB menu:
1. Press the MENU button on the control panel.
2. Press the < > NEXT button until the text “USB Menu” is
shown on the first line of the display.
3. Press the < > button to enter the USB menu.
4. Press the <> or <> buttons to move through the
submenus.
5. Press the < > button to enter the submenu.
Use the procedures in the following table to access and change the
USB Menu settings:
Submenus Default
Setting
Available
Settings
Procedure for
Changing Setting
USB
This submenu
allows you to
set up the USB
interface.
Enabled Enabled
Disabled
Press < > or < >
buttons to toggle between
Enable and Disable.
Press <SELECT> to save the
selection.
PS Protocol ASCII ASCII
RAW
Press < > or < >
buttons to toggle between
ASCII and RAW.
Press <SELECT> to save the
selection.
To Next Page
Loading...
